House mold - what diseases do you expose and how can you get rid of it?

Thermo-insulating joinery. Thermopan windows do not eliminate the risk of mold and mold. Moreover, this system can reduce external infiltrations so that natural air exchange is no longer allowed in the rooms. Under these conditions, insufficient ventilation is one of the main causes of mold emergence. humidity. Steam produced either in the kitchen when cooking or in the bath when showering or even breathing are real sources of condensation at first, then mold.

The superficial and inefficient heating of the house. When the temperature drops below 20 degrees in the house, when walls or windows are cooler than normal, favorable damp conditions are created. Therefore, it is advisable that the indoor temperature be between 20 and 24 degrees Celsius. • Insulate the house well. Proper waterproofing and thermal insulation prevent mold.

The windows must be fitted with PVC frames, insulating glass and materials that will not allow the penetration of water or in the house. • It is also good to check the sanitary facilities. For example, a broken pipe can lead to. That's why it's good to have enough house. • Take great care of the plants in the house.

Plants produce moisture, so it is advisable not to have very many plants in the apartment that do not always have wet soil. • Do not keep paper and unnecessary cartons in the house. It is well known that a large amount of paper stored in the house can promote mold growth. • Do not dry the laundry in the winter. It is good to use a dryer or buy a separate dryer.

• Allergic reactions may occur as a result of inhaling spores or touching contaminated surfaces. The vast majority of allergic reactions occur in the form of: sneezing, nasal secretions, red eyes. • Molds can also be a determining factor in the appearance or worsening. • There are also molds that release toxins that affect the nervous system. They can cause difficulty in concentration and depression.

• First of all, avoid using chlorine-based solutions because they just bleach the mold and create the false impression that they have destroyed it. • Buy anti-mold solutions from the shops. Wash the area with water and, after it has dried, spray an anti-mold spray. • Another solution that you can use to remove mold is. It can be used as such without diluting it in advance.

Apply vinegar to an abrasive sponge and wipe the place. .